If there is a security-policy permitting traffic in this new direction, a new session is created and there are two different sessions in the firewall, both showing only initiating flow traffic:

2019-3-23 · add action=mark-routing chain=prerouting comment=”” connection-mark=pcc2 \ disabled=no src-address=192.168.100.0/24 new-routing-mark=2nd_route passthrough=yes 返程路由设置 定义IP数据报从那个接口进入,就按原路从那个接口回去,即保证每个外网 Solved: SRX firewall routing configuration - J-Net Community Hi, I have a question about Juniper SRX firewall configuration, Running 11.4R7 My Q, is about routing table used while processing traffic passing through the firewall, I have routing configuration part of the routing-instances definition, and it looks like set routing-instances Main-VR instance-ty UniFi - USG Advanced: Policy-Based Routing – Ubiquiti set firewall modify LOAD_BALANCE rule 2500 action modify set firewall modify LOAD_BALANCE rule 2500 modify table 5 set firewall modify LOAD_BALANCE rule 2500 source address 192.168.1.0/24 set firewall modify LOAD_BALANCE rule 2500 protocol all commit;exit. Routing Traffic Out of WAN2 Based on the Source Network, Destination Port and Protocol

VRF-Virtual Routing & Forwarding - 简书

2018-4-15 · Routing tables are used to store the best path to a remote network. Routing tables are processed from top to bottom. If the source of the outgoing packets matches, the routes in the route table are evaluated and the packet forwarded to the correct interface, next hop gateway, or VPN tunnel.

Routing from a single public IP with Azure Firewall

RouterOS PCC负载均衡 – YuS的世界 2019-3-23 · add action=mark-routing chain=prerouting comment=”” connection-mark=pcc2 \ disabled=no src-address=192.168.100.0/24 new-routing-mark=2nd_route passthrough=yes 返程路由设置 定义IP数据报从那个接口进入,就按原路从那个接口回去,即保证每个外网 Solved: SRX firewall routing configuration - J-Net Community Hi, I have a question about Juniper SRX firewall configuration, Running 11.4R7 My Q, is about routing table used while processing traffic passing through the firewall, I have routing configuration part of the routing-instances definition, and it looks like set routing-instances Main-VR instance-ty UniFi - USG Advanced: Policy-Based Routing – Ubiquiti